01470150| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Measuring and Test Conditions Measuring and test conditions
1 Test conditions selected from IEC 60384-1

a) Test limits for tantalum manganese dioxide capacitors Endurance 2000 h at +85 C, VR 2000 h at +125 C, 2/3 V R lC/Cl tan Ilk20 C lC/Cl tan Ilk20 C Storage at high temperature without voltage applied 5000 h at +85 C Damp heat, steady state*) to IEC 60068-2-3
*) Increased test severity for chip capacitors B45196P, see page 150

Standard types 10% of initial value Initial limit value 1,25 . initial limit value HighCap types 15% 1,5 . initial limit value 1,25 . initial limit value

lC/Cl tan Ilk20 C Severity 4: Duration: lC/Cl lC/Cl tan Ilk20 C

10 % of initial value 1,5 . initial limit value Initial limit value
40 ( 2) C; 93 (+2/ 3) % relative humidity 56 days Standard types 5 % of initial value HighCap types 10% 1,2 . initial limit value

Initial limit value
1,5 mm (max. 196 m/s2 i.e. 20 g) 6h 981 m/s2 i.e. 100 g Half-sine waveform 6 ms 5N for 10 s 1 s

Vibration Test Fc to IEC 60068-2-6

Frequency range: 10 ... 2000 Hz Amplitude: Test duration:

Shock Test Ea to IEC 60068-2-27

Peak load: Acceleration pulse: Pulse duration:

3 shock pulses in each of the six orientations Shear test Ue3 to IEC 60068-2-21 Force:

147 10/02

01470150 Datasheet epcos Download PDF

Add this permalink to your bookmarks for future download of 01470150 datasheet

Permalink: http://datasheet.emcelettronica.com/epcos/01470150

01470150 DATASHEET