01520153| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SMD Varistors Monolithic; Telecom Series
Construction
I Cylindrical varistor element, encapsulated I Encapsulation: thermoplast, flame-retardant to UL 94 V-0 I Termination: tinned copper alloy

Features
I Suitable for handling the increased surge voltage of 2 kV I I I I I

according to the directives of Germany's telecom administration Suitable for handling the surge current of the 10/700 m s pulse to ITU-T and IEC 61000-4-5 Matched to line conditions with or without superimposed ringing voltage Electrical equivalents to leaded telecom types Good solderability PSpice models

Taping
I Supply on 8/12-mm tape, for tape dimensions see pages 154/155,

for reel dimensions and packing units see page 157, chapter "SMD Varistors: Taping" Type designation Detailed description of coding system on page 39, chapter "General Technical Information" SIOV-CU 4032 S 95 A G2 EPCOS metal oxide varistor Design Size (nominal) Special tolerance of varistor voltage General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) Operating temperature Storage temperature Electric strength Insulation resistance Response time Solderability 40/85/56 40 C + 85 C 56 days 40 ... + 85 C 40 ... + 125 C in accordance with IEC 60068-1 Taping mode Specifies special tolerance (A) Max. AC operating voltage

in accordance with IEC 60068-2-3 in accordance with CECC 42 000 in accordance with CECC 42 000 in accordance with CECC 42 000 in accordance with IEC 60068-2-58 in accordance with IEC 60068-2-20

2,5 kV 1,0 GW
< 10 ns 235 C, 2 s

Resistance to soldering heat 260 C, 10 s

Note:

Consult EPCOS for consultancy if solvents on water-base are used for cleaning. 152 04/02