01930196| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Leaded Varistors Automotive Series
Construction
I Round varistor element, leaded I Coating: epoxy resin (D1: phenolic resin),

flame-retardant to UL 94 V-0
I Terminals: tinned copper wire

Features
I High energy absorption, I I I I I

particularly in case of load dump Jump-start strength Stable protection level, minimum leakage current High resistance to cyclic temperature stress PSpice models Types for TA = 125 C

Taping
I All types available on tape upon request

Type designation Detailed description of coding system on page 39, chapter "General Technical Information" SIOV-S 14 K 14 AUTO EPCOS metal oxide varistor Design Rated diameter of varistor disk General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) Operating temperature Storage temperature Electric strength Insulation resistance Response time 40/85/56 (D1: 40/125/56) 40 C + 85 C (D1: + 125 C) 56 days 40 ... + 85 C (D1: ... + 125 C) 40 ... + 125 C (D1: ... + 150 C) in accordance with IEC 60068-1 Automotive varistor Max. AC operating voltage Tolerance of varistor voltage

in accordance with IEC 60068-2-3 in accordance with CECC 42 000

2,5 kVRMS (not D1) 10 MW (not D1)
< 25 ns

in accordance with CECC 42 000 in accordance with CECC 42 000

193 04/02