01970199| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Leaded Varistors Automotive Series for 42-V Supply Systems
Construction
I Round varistor element, leaded I Coating: phenolic resin I Terminals: tinned copper wire

Features
I New automotive series for 42-V supply systems I This series complies with the electrical requirements for the new

42-V board net as specified in draft standard ISO/TC22 WD42V-1E
I Stable protection level, minimum leakage current I High resistance to cyclic temperature stress: 1000 cycles I High operating temperature of up to 125 C

Applications
I Reliable protection from inductive voltage spikes,

e. g. in wiper and air vent motors, power windows, rear mirror, power seat and other servo drives Taping
I All types available on tape upon request

Type designation Detailed description of coding system on page 39, chapter "General Technical Information" SIOV-S 07 V42 AUTO S2 D1 EPCOS metal oxide varistor Design Rated diameter of varistor disk High operating temperature: 125 C Crimp style Reliability specification (based on AEC-Q200 (Rev.B)) Complies with requirements for 42-V supply systems (to ISO WD42V-1E) General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) Operating temperature Storage temperature Response time 40/125/56 40 C + 125 C 56 days 40 ... + 125 C 40 ... + 150 C < 25 ns in accordance with IEC 60068-1

in accordance with IEC 60068-2-3 in accordance with CECC 42 000

197 04/02