02010202| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Leaded Varistors Telecom Series
Construction
I Round varistor element, leaded I Coating: epoxy resin, flame-retardant to UL 94 V-0 I Terminals: tinned copper wire

Features
I Suitable for handling the surge current of the 10/700 m s pulse

to ITU-T and IEC 1000-4-5
I Suitable for handling the increased surge voltage according

to the directives of Germany's telecom administration
I Matched to line conditions with or without superimposed ringing voltage I Electrical SMD equivalents available I PSpice models

Taping
I Only available on tape

Type designation Detailed description of coding system on page 39, chapter "General Technical Information" SIOV-S 07 S 60 A G S2 EPCOS metal oxide varistor Design Rated diameter of varistor disk Special tolerance of varistor voltage General technical data Climatic category LCT UCT Damp heat, steady state (93 % r.h., 40 C) Operating temperature Storage temperature Electric strength Insulation resistance Response time 40/85/56 40 C + 85 C 56 days 40 ... + 85 C 40 ... + 125 C in accordance with IEC 60068-1 Crimp style Taping mode Specifies special tolerance (A) Max. AC operating voltage

in accordance with IEC 60068-2-3 in accordance with CECC 42 000 in accordance with CECC 42 000 in accordance with CECC 42 000

2,5 kVRMS 10 MW
< 25 ns

201 04/02