1N4001-1N4007
Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)
1N4001-1N4007
1N4001 - 1N4007
Features
Low forward voltage drop. High surge current capability.
DO-41
COLOR BAND DENOTES CATHODE
General Purpose Rectifiers
Absolute Maximum Ratings
Symbol
VRRM IF(AV) IFSM
TA 25 C unless otherwise noted
Parameter
4001
Peak Repetitive Reverse Voltage Average Rectified Forward Current, .375 " lead length TA 75 C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Storage Temperature Range Operating Junction Temperature 50
Value
4002
100
Units
4005
600
4003
200
4004
400 1.0 30
4006 4007
800 1000 V A A C C
Tstg TJ
-55 to 175 -55 to 175
These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics
Symbol
PD RJA
Parameter
Power Dissipation Thermal Resistance, Junction to Ambient
Value
3.0 50
Units
W C/W
Electrical Characteristics
Symbol
VF Irr IR CT
TA 25 C unless otherwise noted
Parameter
4001
Forward Voltage 1.0 A Maximum Full Load Reverse Current, Full Cycle TA 75 C Reverse Current rated VR TA 25 C TA 100 C Total Capacitance VR 4.0 V, f 1.0 MHz
Device
4002 4003 4004
1.1 30 5.0 500 15
Units
4005 4006 4007
V A A A pF
2003 Fairchild Semiconductor Corporation
1N4001-1N4007, Rev. C1
1N4001 Datasheet Fairchild Download PDF
Add this permalink to your bookmarks for future download of 1N4001 datasheet
Permalink: http://datasheet.emcelettronica.com/fairchild/1N4001
Comments
Technology has moved ahead with giant steps in a very short lapse of time, still this very simple component is required as well as a 32 bit risc machine......
Yes! Read the datasheets, and understand the differences between 1N4001 and 32 bit microcontroller,
it's the first step to understand the Electronics
You are welcome!
1N4001 it's a Rectifier
Use this circuit to operate a small motor used for opening and closing a pair of curtains. As an
advantage over automatic closing and opening systems, you have control of how much, or how
little light to let into a room. For a 12V motor drawing 1amp under load, use 1N4001 diodes.
SOURCE:http://www.mitedu.freeserve.co.uk/Circuits/Switching/dcmotor.html
This unique DIY circuit charges the flashlight by shaking the device. After a few minutes of shaking, the capacitor gets fully charged. It might be okay for finding your keys in the dark but not much more.
SOURCE: http://www.discovercircuits.com/H-Corner/shake-chgr2.htm
http://www.edn.com/articles/pdfs/EDN/19990429/08di2351.pdf
The circuit in the link provides a 1-sec reset, using multiple AND gates for increased fanout. Intended for breadboarding or prototyping, the circuit generates a "snappy" master reset that remains active long enough to eliminate questionable start-ups.
http://www.rowan.sensation.net.au/electronics/stepdown.html
This is a very simple circuit, using parts from the junk box and experimenting with different variations. The 1N4001 diode has been added to the output to isolate the switching function from the large value smoothing capacitor.
This variable power supply uses the 1N4001 diode, among many other basic components. The voltage range can be varied in the range 0-28 Volts.Current is at 20A.
http://www.elecfree.com/circuit/power-supply/power-supply-regulatable-0-...
There is a huge market for semiconductors but it take a few billion dollars at the least to start a semiconductor manufacturing unit and that is why there is great market for Obsolete Semiconductors too