74ACT841

74ACT841 10-Bit Transparent Latch with 3-STATE Outputs

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

74ACT841 10-Bit Transparent Latch with 3-STATE Outputs

November 1988 Revised September 2000

74ACT841 10-Bit Transparent Latch with 3-STATE Outputs
General Description
The ACT841 bus interface latch is designed to eliminate the extra packages required to buffer existing latches and provide extra data width for wider address/data paths or buses carrying parity. The ACT841 is a 10-bit transparent latch, a 10-bit version of the ACT373.

Features
s ACT841 has TTL-compatible inputs s Outputs source/sink 24 mA s Non-inverting 3-STATE outputs

Ordering Code:
Order Number 74ACT841SC 74ACT841MTC 74ACT841SPC Package Number M24B MTC24 N24C Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. (SPC not available in Tape and Reel.)

Logic Symbols

Connection Diagram

IEEE/IEC

Pin Descriptions
Pin Names D0 D9 O0 O9 OE LE Description Data Inputs 3-STATE Outputs Output Enable Latch Enable

FACT is a trademark of Fairchild Semiconductor Corporation.

2000 Fairchild Semiconductor Corporation

DS010156

www.fairchildsemi.com