DM74ALS374

DM74ALS374 Octal 3-STATE D-Type Edge-Triggered Flip-Flop

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

DM74ALS374 Octal 3-STATE D-Type Edge-Triggered Flip-Flop

September 1986 Revised February 2000

DM74ALS374 Octal 3-STATE D-Type Edge-Triggered Flip-Flop
General Description
This 8-bit register features totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic-level drive provides this register with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pull-up components. It is particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops of the DM74ALS374 are edge-triggered D-type flip-flops. On the positive transition of the clock, the Q outputs will be set to the logic states that were set up at the D inputs. A buffered output control input can be used to place the eight outputs in either a normal logic state (HIGH or LOW logic levels) or a high-impedance state. In the high-impedance state the outputs neither load nor drive the bus lines significantly. The output control does not affect the internal operation of the flip-
flops. That is, the old data can be retained or new data can be entered even while the outputs are OFF.

Features
s Switching specifications at 50 pF s Switching specifications guaranteed over full temperature and VCC range s Advanced oxide-isolated, ion-implanted Schottky TTL process s Functionally and pin-for-pin compatible with LS TTL counterpart s Improved AC performance over DM74LS374 at approximately half the power s 3-STATE buffer-type outputs drive bus lines directly

Ordering Code:
Order Number DM74ALS374WM DM74ALS374SJ DM74ALS374N Package Number M20B M20D N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.

Connection Diagram

2000 Fairchild Semiconductor Corporation

DS006113

www.fairchildsemi.com