FAN1086

www.fairchildsemi.com

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

www.fairchildsemi.com

FAN1086
1.5A Adjustable/Fixed Low Dropout Linear Regulator

Features
Low dropout voltage Load regulation: 0.05% typical Trimmed current limit On-chip thermal limiting Standard SOT-223, TO-263, and TO-252 packages Three-terminal adjustable or fixed 2.5V, 2.85V, 3.3V, 5V

Description
The FAN1086 and FAN1086-2.5, -2.85, -3.3 and -5 are low dropout three-terminal regulators with 1.5A output current capability. These devices have been optimized for low voltage where transient response and minimum input voltage are critical. The 2.85V version is designed specifically to be used in Active Terminators for SCSI bus. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload and ambient temperatures that would create excessive junction temperatures. Unlike PNP type regulators where up to 10% of the output current is wasted as quiescent current, the quiescent current of the FAN1086 flows into the load, increasing efficiency. The FAN1086 series regulators are available in the industrystandard SOT-223, TO-263, and TO-252 power packages.

Applications
Active SCSI terminators High efficiency linear regulators Post regulators for switching supplies Battery chargers 5V to 3.3V linear regulators Motherboard clock supplies

Typical Applications

FAN1086 VIN 3.3V 10 F ADJ VIN VOUT R1 124 22 F 1.5V at 1.5A

VOUT VREF(1 R2/R1) IAdj R2

R2 24.9

FAN1086-2.85 VIN 5V 10 F GND VIN VOUT 22 F 2.85V at 1.5A

REV. 1.0.7 11/10/03