FIN1022

FIN1022 2 X 2 LVDS High Speed Crosspoint Switch

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

FIN1022 2 X 2 LVDS High Speed Crosspoint Switch

September 2001 Revised December 2001

FIN1022 2 X 2 LVDS High Speed Crosspoint Switch
General Description
This non-blocking 2x2 crosspoint switch has a fully differential input to output data path for low noise generation and low pulse width distortion. The device can be used as a high speed crosspoint switch, 2:1 multiplexer, 1:2 demultiplexer or 1:2 signal splitter. The inputs can directly interface with LVDS and LVPECL levels.

Features
s Low jitter, 800 Mbps full differential data path s Worst case jitter of 190ps with PRBS 223 - 1 data pattern at 800 Mbps s Rail-to-rail common mode range is 0.5V to 3.25V s Worst case power dissipation is less than 126 mW s Open-circuit fail safe protection s Fast switch time of 1.1 ns typical s 35 ps typical pin channel to channel skew s 3.3V power supply operation s Non-blocking switch s LVDS receiver inputs accept LVPECL signals directly s 7.5 kV HBM ESD protection s 16-lead SOIC package and TSSOP package s Inter-operates with TIA/EIA 644-1995 specification s See the Fairchild Interface Solutions web page for cross reference information: www.fairchildsemi.com/products/interface/lvds.html

Ordering Code:
Order Number FIN1022M FIN1022MTC Package Number M16A MTC16 Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.

Logic Symbol

2001 Fairchild Semiconductor Corporation

DS500653

www.fairchildsemi.com