FIN1104

FIN1104 LVDS 4 Port High Speed Repeater

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

FIN1104 LVDS 4 Port High Speed Repeater

January 2002 Revised January 2003

FIN1104 LVDS 4 Port High Speed Repeater
General Description
This 4 port repeater is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. The FIN1104 accepts and outputs LVDS levels with a typical differential output swing of 330 mV which provides low EMI at ultra low power dissipation even at high frequencies. The FIN1104 provides a VBB reference for AC coupling on the inputs. In addition the FIN1104 can directly accept LVPECL, HSTL, and SSTL-2 for translation to LVDS.

Features
s Greater than 800 Mbps data rate s 3.3V power supply operation s 3.5 ps maximum random jitter and 135 ps maximum deterministic jitter s Wide rail-to-rail common mode range s LVDS receiver inputs accept LVPECL, HSTL, and SSTL-2 directly s Ultra low power consumption s 20 ps typical channel-to-channel skew s Power off protection s 7.5 kV HBM ESD Protection s Meets or exceeds the TIA/EIA-644-A LVDS standard s Available in space saving 24-Lead TSSOP package s Open circuit fail safe protection s VBB reference output

Ordering Code:
Order Number FIN1104MTC Package Number MTC24 Package Description 24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code.

Pin Descriptions
Pin Name RIN1 , RIN2 , RIN3 , RIN4 RIN1-, RIN2-, RIN3-, RIN4- Description Non-inverting LVDS Input Inverting LVDS Input

Connection Diagram

DOUT1 , DOUT2 , Non-inverting Driver Output DOUT3 , DOUT4 DOUT1-, DOUT2-, Inverting Driver Output DOUT3-, DOUT4- EN EN VCC GND VBB Driver Enable Pin for All Output Inverting Driver Enable Pin for all Outputs Power Supply Ground Reference Voltage Output

2003 Fairchild Semiconductor Corporation

DS500656

www.fairchildsemi.com