FSAL200

FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer / Demultiplexer Switch

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer / Demultiplexer Switch

June 2006

FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer / Demultiplexer Switch
Features
Typical 6 switch connection between two ports Minimal propagation delay through the switch Low ICC Zero bounce in flow-through mode Control inputs compatible with TTL level Rail-to-rail signal handling Low insertion loss Route communications signals include:

Description
The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1 high-speed CMOS TTL-compatible analog multiplexer/ demultiplexer switch. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When OE is LOW, the select pin connects the A Port to the selected B Port output. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports.

10/100 Ethernet 100VG-AnyLAN ATM25 SONET OCI 51.8 Mbps USB1.1 T1/E1 Token Ring 4/16 Mbps

Ordering Information
Part Number
FSAL200QSC FSAL200MTC

Package Number Pb-Free
MQA16 MTC16 Yes Yes

Package
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

Packing Method

This device is also available in tape and reel. To order, append X to the part number.

2002 - 2006 Fairchild Semiconductor Corporation

www.fairchildsemi.com

FSAL200 Rev. 1.7.0