MMBT2907A

PN2907A / MMBT2907A / PZT2907A

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

PN2907A / MMBT2907A / PZT2907A

PN2907A

MMBT2907A
C

PZT2907A
C

E C B

TO-92
E

SOT-23
Mark: 2F

SOT-223

PNP General Purpose Amplifier
This device is designed for use as a general purpose amplifier and switch requiring collector currents to 500 mA. Sourced from Process 63.

Absolute Maximum Ratings
Symbol
VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous

TA 25 C unless otherwise noted

Parameter

Value
60 60 5.0 800 -55 to 150

Units
V V V mA C

Operating and Storage Junction Temperature Range

These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors.

Thermal Characteristics
Symbol
PD RJC RJA

TA 25 C unless otherwise noted

Characteristic
Total Device Dissipation Derate above 25 C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient PN2907A 625 5.0 83.3 200

Max
MMBT2907A 350 2.8 357 PZT2907A 1,000 8.0 125

Units
mW mW/ C C/W C/W

Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2.

1998 Fairchild Semiconductor Corporation