MPC7450RXLDPNS| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Freescale Semiconductor, Inc.
Advance Information
MPC7450RXLDPNS/D Rev 0, 11/2001 MPC7450 Part Number Specification for the XPC7450RXnnnLD Series

Freescale Semiconductor, Inc...

Motorola Part Numbers Affected: XPC7450RX533LD XPC7450RX600LD XPC7450RX667LD

, OR T This document describes part-number-specific changes to recommended operating conditions UC those described in the general and revised electrical specifications, as applicable, from D MPC7450 RISC Microprocessor Hardware Specifications (order # MPC7450EC/D). ON IC M Specifications provided in this document supersede those in the MPC7450 RISC SE Microprocessor Hardware Specifications, Rev. 4 or later, for the part numbers listed in E Table A only. Specifications notAL addressed herein are unchanged. Because this document is frequently updated, refer toSC http://www.motorola.com/semiconductors or to your Motorola sales office for the latestEE version. FR Note that headings and table numbers in this document are not consecutively numbered. They BY are intended to correspond to the heading or table affected in the general hardware D E specification. IV H Part numbers addressed in this document are listed in Table A. RC A
Table A. Part Numbers Addressed by this Data Sheet
Operating Conditions Motorola Part Number XPC7450RX533LD XPC7450RX600LD XPC7450RX667LD CPU Frequency 533 MHz 600 MHz 667 MHz VDD TJ ( C) Significant Differences from Hardware Specification

C IN

1.8 V 50 mV 0 to 105 VDD constrained to 1.8 V nominal (1.6 V not supported), higher power 1.8 V 50 mV 0 to 105 consumption due to higher core 1.8 V 50 mV 0 to 105 voltage.

Note: The X prefix in a Motorola part number designates a "Pilot Production Prototype" as defined by Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested, and Q.A. inspected on a qualified technology to simulate normal production. These parts have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product changes may still occur while shipping pilot production prototypes.

For More Information On This Product, Go to: www.freescale.com