ISL24011| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

ISL24011
Octal Voltage Level Shifter for TFT/LCD Panels
Data Sheet March 28, 2006 FN6196.2

High Voltage TFT-LCD Logic Driver
The ISL24011 is a high voltage TFT-LCD logic driver with a +40V and -20V (momentary absolute max) output voltage swing capability. It is manufactured using Intersil's proprietary monolithic high voltage bipolar process and is capable of driving a 4700pF load in 500ns. The ISL24011 will level shift a digital input signal to an output voltage nearly equal to its output supply voltages. The ISL24011 has 3 supplies. VON1 and VON2 are positive supplies with a voltage range between +10V and +40V (absolute max). VOFF is the negative supply with a voltage range between -5V and -20V (absolute max). Outputs 1 through 6 are connected to VON1 and VOFF. Outputs 7 and 8 are connected to VON2 and VOFF. This configuration enables outputs 1 through 6 to provide slicing to the row drivers to reduce flicker, and outputs 7 and 8 to control possible supply lines. VON2 should remain constant. It is possible to tie VON1 and VON2 supplies together, if independent control as described above is not desired. VON2 is required to be gre
ater than or equal to VON1 at all times. The ISL24011 is available in a 20 Ld TSSOP package. It is specified for operation over the -40 C to +85 C industrial temperature range.

Features
0V to 5.5V (absolute max) Input Voltage Range +40V and -20V (momentary absolute max) Output Voltage Range 10mA Output Continuous Current (all 8 channels) 25mA Output Peak Current (all 8 channels) Rise/Fall Times 260ns/290ns Propagation Delay 230ns 50kHz Input Logic Frequency 20 Ld TSSOP Pb-Free Package Pb-Free Plus Anneal Available (RoHS Compliant)

Applications
TFT-LCD panels

Pinout
ISL24011 (20 LD TSSOP) TOP VIEW
GND IN1 IN2 IN3 1 2 3 4 5 6 7 8 9 20 VON1 19 OUT1 18 OUT2 17 OUT3 16 OUT4 15 OUT5 14 OUT6 13 OUT7 12 OUT8 11 VON2

Ordering Information
PART NUMBER ISL24011IVZ (Note) PART TEMP. MARKING RANGE ( C) 24011IVZ -40 to +85 -40 to +85 PACKAGE PKG. DWG. #

IN4 IN5 IN6 IN7 IN8

20 Ld TSSOP M20.173 (Pb-free) 20 Ld TSSOP M20.173 (Pb-free) Tape & Reel

ISL24011IVZ-T 24011IVZ (Note)

VOFF 10

NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005-2006. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.