DS96172| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

DS96172/DS96174 RS-485/RS-422 Quad Differential Line Drivers

June 1998

DS96172/DS96174 RS-485/RS-422 Quad Differential Line Drivers
General Description
The DS96172 and DS96174 are high speed quad differential line drivers designed to meet EIA Standard RS-485. The devices have TRI-STATE outputs and are optimized for balanced multipoint data bus transmission at rates up to 10 Mbps. The drivers have wide positive and negative common mode range for multipoint applications in noisy environments. Positive and negative current-limiting is provided which protects the drivers from line fault conditions over a +12V to -7.0V common mode range. A thermal shutdown feature is also provided and occurs at junction temperature of approximately 160 C. The DS96172 features an active high and active low Enable, common to all four drivers. The DS96174 features separate active high Enables for each driver pair. Compatible RS-485 receivers, transceivers, and repeaters are also offered to provide optimum bus performance. The respective device types are DS96173, DS96175, DS96176 AND DS96177.

Features
n n n n n n n n n Meets EIA Standard RS-485 and RS-422A Monotonic differential output switching Transmission rate to 10 Mbs TRI-STATE outputs Designed for multipoint bus transmission Common mode output voltage range: -7V to +12V Operates from single +5V supply Thermal shutdown protection DS96172/DS96174 are lead and function compatible with the SN75172/75174 or the AM26LS31/MC3487 respectively

Connection Diagrams
16-Lead DIP DS96172

16-Lead DIP DS96174

00962602

Top View
00962601

Top View

Order Number DS96172CN or DS96174CN See NS Package Number N16E

TRI-STATE is a registered trademark of National Semiconductor Corporation.

2004 National Semiconductor Corporation

DS009626

www.national.com