74LVC16241A_3| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

74LVC16241A
16-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state
Rev. 03 -- 16 February 2004 Product data sheet

1. General description
The 74LVC16241A is a high-performance, low-power and low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. In 3-state operation, outputs can handle 5 V. These features allow the use of these devices in a mixed 3.3 V and 5 V environment. The 74LVC16241A is a 16-bit non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs (1OE, 2OE, 3OE and 4OE). Schmitt-trigger action at all inputs makes the circuit highly tolerant for slower input rise and fall times. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

2. Features
s s s s s s s s s 5 V tolerant inputs and outputs for interfacing with 5 V logic Wide supply voltage range from 1.2 V to 3.6 V CMOS low power consumption MULTIBYTE flow-through standard pin-out architecture Low inductance multiple power and ground pins for minimum noise and ground bounce Direct interface with TTL levels High-impedance outputs when VCC = 0 V Complies with JEDEC standard no. 8-1A ESD protection: x HBM EIA/JESD22-A114-A exceeds 2000 V x MM EIA/JESD22-A115-A exceeds 200 V. Specified from -40 C to +85 C and -40 C to +125 C.