BT138_SERIES_2| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Philips Semiconductors

Product specification

Triacs

BT138 series

GENERAL DESCRIPTION
Passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.

QUICK REFERENCE DATA
SYMBOL PARAMETER BT138BT138BT138Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. 600 600F 600G 600 12 95 MAX. 800 800F 800G 800 12 95 UNIT

VDRM IT(RMS) ITSM

V A A

PINNING - TO220AB
PIN 1 2 3 tab DESCRIPTION main terminal 1

PIN CONFIGURATION
tab

SYMBOL

T2
main terminal 2 gate main terminal 2
1 23

LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current I2t for fusing Repetitive rate of rise of on-state current after triggering full sine wave; Tmb 99 C full sine wave; Tj = 25 C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 20 A; IG = 0.2 A; dIG/dt = 0.2 A/us T2+ G+ T2+ GT2- GT2- G+ CONDITIONS MIN. -40 -600 6001 12 95 105 45 50 50 50 10 2 5 5 0.5 150 125 MAX. -800 800 UNIT V A A A A2s A/us A/us A/us A/us A V W W C C

I2t dIT/dt

IGM VGM PGM PG(AV) Tstg Tj

Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature

over any 20 ms period

1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 15 A/us. June 2001 1 Rev 1.400