BTA140B_SERIES_1| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Philips Semiconductors

Product specification

Triacs

BTA140B series

GENERAL DESCRIPTION
Glass passivated triacs in a plastic envelope suitable for surface mounting, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.

QUICK REFERENCE DATA
SYMBOL VDRM IT(RMS) ITSM PARAMETER BTA140BRepetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. MAX. MAX. UNIT 500 500 25 190 600 600 25 190 800 800 25 190 V A A

PINNING - SOT404
PIN 1 2 3 mb DESCRIPTION main terminal 1 main terminal 2 gate main terminal 2

PIN CONFIGURATION
mb

SYMBOL

T2
2 1 3

LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current I2t for fusing Repetitive rate of rise of on-state current after triggering full sine wave; Tmb 91 C full sine wave; Tj = 25 C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 30 A; IG = 0.2 A; dIG/dt = 0.2 A/us T2+ G+ T2+ GT2- GT2- G+ CONDITIONS MIN. -40 -500 5001 MAX. -600 6001 25 190 209 180 50 50 50 10 2 5 5 0.5 150 125 -800 800 UNIT V A A A A2s A/us A/us A/us A/us A V W W C C

I2t dIT/dt

IGM VGM PGM PG(AV) Tstg Tj

Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature

over any 20 ms period

1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 15 A/us. September 1997 1 Rev 1.100