BTA204W_SERIES_B_C_2| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Philips Semiconductors

Product specification

Three quadrant triacs high commutation
GENERAL DESCRIPTION
Passivated high commutation triacs in a plastic envelope suitable for surface mounting intended for use in circuits where high static and dynamic dV/dt and high dI/dt can occur. These devices will commutate the full rated rms current at the maximum rated junction temperature without the aid of a snubber.

BTA204W series B and C

QUICK REFERENCE DATA
SYMBOL PARAMETER MAX. MAX. 600B 600C 600 1 10 MAX. UNIT 800B 800C 800 1 10 BTA204W- 500B BTA204W- 500C Repetitive peak 500 off-state voltages RMS on-state current 1 Non-repetitive peak on-state 10 current

VDRM IT(RMS) ITSM

V A A

PINNING - SOT223
PIN 1 2 3 tab DESCRIPTION main terminal 1

PIN CONFIGURATION
4

SYMBOL

T2
main terminal 2 gate main terminal 2
1 2 3

LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current full sine wave; Tsp 108 C full sine wave; Tj = 25 C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 1.5 A; IG = 0.2 A; dIG/dt = 0.2 A/us CONDITIONS MIN. -500 5001 MAX. -600 6001 1 -800 800 UNIT V A

I2t dIT/dt IGM VGM PGM PG(AV) Tstg Tj

I2t for fusing Repetitive rate of rise of on-state current after triggering Peak gate current Peak gate voltage Peak gate power Average gate power Storage temperature Operating junction temperature

10 11 0.5 100 2 5 5 0.5 150 125

A A A2s A/us A V W W C C

over any 20 ms period

-40 -

1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 6 A/us. December 1998 1 Rev 1.000