DTC114EET1-D| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

DTC114EET1 Series Bias Resistor Transistor
NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network
This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC-75/SOT-416 package which is designed for low power surface mount applications.
Features http://onsemi.com

NPN SILICON BIAS RESISTOR TRANSISTORS

Simplifies Circuit Design Reduces Board Space Reduces Component Count The SC-75/SOT-416 Package Can be Soldered Using Wave or Reflow The Modified Gull-Winged Leads Absorb Thermal Stress During Soldering Eliminating the Possibility of Damage to the Die Pb-Free Packages are Available

PIN 1 BASE (INPUT)

PIN 3 COLLECTOR (OUTPUT) R1 R2 PIN 2 EMITTER (GROUND)

3 2

MAXIMUM RATINGS (TA = 25 C unless otherwise noted)
Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Symbol VCBO VCEO IC Value 50 50 100 Unit Vdc Vdc mAdc

1 SC-75 (SOT-416) CASE 463 STYLE 1

THERMAL CHARACTERISTICS
Rating Total Device Dissipation, FR-4 Board (Note 1) @ TA = 25 C Derate above 25 C Thermal Resistance, Junction-to-Ambient (Note 1) Total Device Dissipation, FR-4 Board (Note 2) @ TA = 25 C Derate above 25 C Thermal Resistance, Junction-to-Ambient (Note 2) Junction and Storage Temperature Range Symbol PD 200 1.6 RqJA PD 300 2.4 RqJA TJ, Tstg 400 -55 to +150 mW mW/ C C/W C = Specific Device Code xx = (Refer to page 2) M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. xx 600 mW mW/ C C/W xx M G G Value Unit

MARKING DIAGRAM

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-4 @ Minimum Pad 2. FR-4 @ 1.0 1.0 Inch Pad

ORDERING INFORMATION
See detailed ordering, marking, and shipping information in the package dimensions section on page 2 of this data sheet.

Semiconductor Components Industries, LLC, 2006

March, 2006 - Rev. 8

Publication Order Number: DTC114EET1/D