EMG5DXV5-D| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

EMG2DXV5T1, EMG5DXV5T1
Preferred Devices

Dual Bias Resistor Transistors
NPN Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-553 package which is designed for low power surface mount applications.
Features http://onsemi.com

NPN SILICON BIAS RESISTOR TRANSISTORS

(3) R1 R2 DTr2

(2) R2

(1) R1 DTr1

Simplifies Circuit Design Reduces Board Space Reduces Component Count Moisture Sensitivity Level: 1 Available in 8 mm, 7 inch Tape and Reel Lead-Free Solder Plating Pb-Free Packages are Available

(4)

(5)

MAXIMUM RATINGS (TA = 25 C unless otherwise noted)
Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Symbol VCBO VCEO IC Value 50 50 100 Unit Vdc Vdc mAdc

5 1

SOT-553 CASE 463B

THERMAL CHARACTERISTICS
Characteristic Total Device Dissipation TA = 25 C Derate above 25 C Thermal Resistance - Junction-to-Ambient Thermal Resistance - Junction-to-Lead Junction and Storage Temperature Range Symbol PD Max 230 (Note 1) 338 (Note 2) 1.8 (Note 1) 2.7 (Note 2) 540 (Note 1) 370 (Note 2) 264 (Note 1) 287 (Note 2) -55 to +150 Unit mW C/W C/W C/W C

MARKING DIAGRAM
5 XX M G G 1 xx = Device Code xx= UF (EMG5) UP (EMG2) M = Date Code G = Pb-Free Package (Note: Microdot may be in either location)

RqJA RqJL TJ, Tstg

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. FR-4 @ Minimum Pad 2. FR-4 @ 1.0 x 1.0 inch Pad

ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.

Preferred devices are recommended choices for future use and best overall value.

Semiconductor Components Industries, LLC, 2005

1

October, 2005 - Rev. 0

Publication Order Number: EMG5DXV5/D

EMG5DXV5-D Datasheet onsemiconductor Download PDF

Add this permalink to your bookmarks for future download of EMG5DXV5-D datasheet

Permalink: http://datasheet.emcelettronica.com/onsemiconductor/EMG5DXV5-D

EMG5DXV5-D DATASHEET