MURD620CT-D| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

MURD620CT
Preferred Device

SWITCHMODEt Power Rectifier
DPAK Surface Mount Package
These state-of-the-art devices are designed for use in switching power supplies, inverters and as free wheeling diodes.
Features http://onsemi.com

Ultrafast 35 Nanosecond Recovery Time Low Forward Voltage Drop Low Leakage Pb-Free Packages are Available

ULTRAFAST RECTIFIER 6.0 AMPERES 200 VOLTS

Mechanical Characteristics:

1 4 3

Case: Epoxy, Molded Weight: 0.4 Gram (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260 C Max. for 10 Seconds
4 Symbol VRRM VRWM VR IF(AV) 3.0 6.0 IF 6.0 A Value 200 Unit V 1 2 3

MARKING DIAGRAM

MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 140 C) Per Diode Per Device Peak Repetitive Forward Current (Rated VR, Square Wave, Per Diode 20 kHz, TC = 145 C) Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) Operating Junction and Storage Temperature Range

DPAK CASE 369C

YWW U 620TG

Y WW U620T G

= Year = Work Week = Device Code = Pb-Free Package

IFSM

ORDERING INFORMATION
Device MURD620CT MURD620CTG Package DPAK DPAK (Pb-Free) DPAK DPAK (Pb-Free) Shipping 75 Units/Rail 75 Units/Rail 2500/Tape & Reel 2500/Tape & Reel

TJ, Tstg

-65 to +175

THERMAL CHARACTERISTICS (Per Diode)
Rating Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient (Note 1) Symbol RqJC RqJA Value 9 80 Unit C/W C/W

MURD620CTT4 MURD620CTT4G

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Rating applies when surface mounted on the minimum pad sizes recommended.

For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
Preferred devices are recommended choices for future use and best overall value.

Semiconductor Components Industries, LLC, 2006

February, 2006 - Rev. 6

Publication Order Number: MURD620CT/D