NCV7356-D| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

NCV7356 Single Wire CAN Transceiver
The NCV7356 is a physical layer device for a single wire data link capable of operating with various Carrier Sense Multiple Access with Collision Resolution (CSMA/CR) protocols such as the Bosch Controller Area Network (CAN) version 2.0. This serial data link network is intended for use in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor and/or dedicated logic devices which use the network. The network shall be able to operate in either the normal data rate mode or a high-speed data download mode for assembly line and service data transfer operations. The high-speed mode is only intended to be operational when the bus is attached to an off-board service node. This node shall provide temporary bus electrical loads which facilitate higher speed operation. Such temporary loads should be removed when not performing download operations. The bit rate for normal communications is typically 33 kbit/s, f
or high-speed transmissions like described above a typical bit rate of 83 kbit/s is recommended. The NCV7356 features undervoltage lockout, timeout for faulty blocked input signals, output blanking time in case of bus ringing and a very low sleep mode current. The device is compliant with GMW3089V2.4 General Motors Corporation specification.
Features

http://onsemi.com MARKING DIAGRAMS
8 1 SOIC-8 D SUFFIX CASE 751 14 14 1 SOIC-14 D SUFFIX CASE 751A 1 A WL, L Y WW, W G or G = Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Package NCV7356G AWLYWW 8 V7356 ALYW G 1

PIN CONNECTIONS
TxD 1 MODE0 2 MODE1 3 RxD 4 (Top View) GND 1 TxD 2 MODE0 3 MODE1 4 RxD 5 NC 6 GND 7 (Top View) 14 GND 13 NC 12 CANH 11 LOAD 10 VBAT 9 8 INH GND 8 GND 7 CANH 6 LOAD 5 VBAT

Fully Compatible with J2411 Single Wire CAN Specification 60 mA (max) Sleep Mode Current Operating Voltage Range 5.0 to 27 V Up to 100 kbps High-Speed Transmission Mode Up to 40 kbps Bus Speed Selective BUS Wake-Up Logic Inputs Compatible with 3.3 V and 5 V Supply Systems Control Pin for External Voltage Regulators (14 Pin Package Only) Standby to Sleep Mode Timeout Low RFI Due to Output Wave Shaping Fully Integrated Receiver Filter Bus Terminals Short-Circuit and Transient Proof Loss of Ground Protection Protection Against Load Dump, Jump Start Thermal Overload and Short Circuit Protection ESD Protection of 4.0 kV on CANH Pin (2.0 kV on Any Other Pin) Undervoltage Lock Out Bus Dominant Timeout Feature Internally Fused Leads in SO-14 Package NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes Pb-Free Packages are Available

ORDERING INFORMATION
Device NCV7356D1G Package Shipping 98 Units / Rail 2500 Tape & Reel 55 Units / Rail 55 Units / Rail 2500 Tape & Reel SOIC-8 (Pb-Free) NCV7356D1R2G SOIC-8 (Pb-Free) NCV7356D2 NCV7356D2G NCV7356D2R2 NCV7356D2R2G SOIC-14 SOIC-14 (Pb-Free) SOIC-14

SOIC-14 2500 Tape & Reel (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NCV7356/D

Semiconductor Components Industries, LLC, 2007

November, 2007 - Rev. 7