NCV8512-D| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

NCV8512 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Monitor FLAG
The NCV8512 is a 5.0 V precision micropower voltage regulator. The output current capability is 150 mA. The output voltage is accurate within 2.0% with a maximum dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature drawing only 130 mA with a 100 mA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY), and a FLAG monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down. The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to RADJ lead
. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.
Features http://onsemi.com MARKING DIAGRAM
1 SOIC 16 LEAD WIDE BODY EXPOSED PAD PW SUFFIX CASE 751AG A WL YY WW G 16 NCV8512 AWLYYWWG

= Assembly Location = Wafer Lot = Year = Work Week = Pb-Free Device

PIN CONNECTIONS*
VOUT NC NC NC NC VIN MON NC 1 16 FLAG RESET NC GND NC NC DELAY RADJ

5.0 V 2.0% Output Low 130 mA Quiescent Current Active RESET Adjustable Reset 150 mA Output Current Capability Fault Protection - +60 V Peak Transient Voltage - -15 V Reverse Voltage - Short Circuit - Thermal Overload Early Warning through FLAG/MON Leads Thermally Enhanced in SOW-16 Exposed Pad NCV Prefix for Automotive and Other Applications Requiring Site and Control Changes AEC Qualified PPAP Capable These are Pb-Free Devices

*Pin connections for reference only.

ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet.

Semiconductor Components Industries, LLC, 2008

June, 2008 - Rev. 2

Publication Order Number: NCV8512/D