62m_8eds| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Mitsubishi microcomputers

Description

M16C / 62M (80-pin version) Group (Low voltage version)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Description
The M16C/62M (80-pin version) group (low voltage version) of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 80-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other high-speed processing applications. The M16C/62M (80-pin version) group (low voltage version) includes a wide range of products with different internal memory types and sizes and various package types.

Features
Memory capacity .................................. ROM (See Figure 1.1.3. ROM Expansion) RAM 10K to 20K bytes Shortest instruction execution time ...... 100ns (f(XIN)=10MHZ, VCC=2.7V to 3.6V) 142.9ns (f(XIN)=7MHZ, VCC=2.2V to 3.6V, with software one-wait) Supply voltage ..................................... 2.7V to 3.6V (f(XIN)=10MHZ, without software wait) 2.4V to 2.7V (f(XIN)= 7MHZ, without software wait) 2.2V to 2.4V (f(XIN)= 7MHZ, with software one-wait) Low power consumption ...................... 28.5mW ( f(XIN)=10MHZ, with software one-wait, VCC = 3V) Interrupts .............................................. 25 internal and 5 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt) Multifunction 16-bit timer ...................... 5 output timers + 6 input timers (3 for timer function only) Serial I/O .............................................. 5 channels (2 for UART or clock synchronous, 1 for UART, 2 for clock synchronous) DMAC ...........
....................................... 2 channels (trigger: 24 sources) A-D converter ....................................... 10 bits X 8 channels (Expandable up to 10 channels) D-A converter ....................................... 8 bits X 2 channels CRC calculation circuit ......................... 1 circuit Watchdog timer .................................... 1 line Programmable I/O ............................... 70 lines _______ Input port .............................................. 1 line (P85 shared with NMI pin) Clock generating circuit ....................... 2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator) Note: Memory expansion mode and microprocessor mode are not supported.

Applications
Audio, cameras, office equipment, communications equipment, portable equipment