e62n_8ds| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Rev.1.1

Mitsubishi microcomputers

M16C / 62N Group (80-pin)
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

Description

Description
The M16C/62N (80-pin version) group of single-chip microcomputers are built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and are packaged in a 80-pin plastic molded QFP. These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1M bytes of address space, low voltage (2.4V(mask ROM version is 2.2V) to 3.6V), they are capable of executing instructions at high speed. They also feature a built-in multiplier and DMAC, making them ideal for controlling office, communications, industrial equipment, and other highspeed processing applications. The M16C/62N (80-pin version) group includes a wide range of products with different internal memory types and sizes and various package types.

Features
Memory capacity .................................. ROM (See Figure 1.1.3. ROM Expansion) RAM 10K to 20K bytes Shortest instruction execution time ...... 62.5ns (f(XIN)=16MHZ, VCC=3.0V to 3.6V) 142.9ns (f(XIN)=7MHZ, VCC=2.4V to 3.6V without software wait) Supply voltage ..................................... 3.0V to 3.6V (f(XIN)=16MHZ, without software wait) 2.4V to 3.6V (f(XIN)=7MHZ, without software wait) 2.2V to 3.6V (f(XIN)=7MHZ, with software one-wait) :mask ROM version Low power consumption ...................... 34.0mW (VCC = 3V, f(XIN)=10MHZ, without software wait) 66.0mW (VCC = 3.3V, f(XIN)=16MHZ, without software wait) Interrupts .............................................. 25 internal and 5 external interrupt sources, 4 software interrupt sources; 7 levels (including key input interrupt) Multifunction 16-bit timer ...................... 5 output timers + 6 input timers (3 for timer function only) Serial I/O .............................................. 5 channels (2 for UART or cloc
k synchronous, 1 for UART, 2 for clock synchronous) DMAC .................................................. 2 channels (trigger: 25 sources) A-D converter ....................................... 10 bits X 8 channels (Expandable up to 18 channels) D-A converter ....................................... 8 bits X 2 channels CRC calculation circuit ......................... 1 circuit Watchdog timer .................................... 1 line Programmable I/O ............................... 70 lines _______ Input port .............................................. 1 line (P85 shared with NMI pin) Clock generating circuit ....................... 2 built-in clock generation circuits (built-in feedback resistor, and external ceramic or quartz oscillator) Note: Memory expansion mode and microprocessor mode are not supported.

Applications
Audio, cameras, office equipment, communications equipment, portable equipment

------Table of Contents-----About the M16C/62N (80-pin version) group .. 7 Central Processing Unit (CPU) ..................... 11 Reset ............................................................. 14 Processor Mode ............................................ 21 Clock Generating Circuit ............................... 26 Protection ...................................................... 35 Interrupts ....................................................... 36 Watchdog Timer ............................................ 56 DMAC ........................................................... 58 Timer ............................................................. 68 Serial I/O ....................................................... 86 A-D Converter ............................................. 127 D-A Converter ............................................. 137 CRC Calculation Circuit .............................. 139 Programmable I/O Ports ............................. 141 Electric Characteristics ...................
............ 151 Flash memory version ................................. 158