rej10j0657_fztat| Datasheet

By datasheet - March 1st, 2009

rej10j0657_fztat| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

Ver.3.0

Microcomputer Tool Marketing Dept. Renesas Solutions Corp.

The interface circuit between H8S/2377RF and F-ZTAT programming adapter board
This figure shows you the interface circuit between H8S/2377RF and F-ZTAT adapter board (HS0008EASF4H/HS0008EAUF1H). The value of pull-up and pull down resisters are for your reference.

Adapter-Board (HS0008EASF4H/HS0008EAUF1H)

Vcc Pull Up Over 47Kohm

18,20 VIN(Vcc) RxD TxD MD0 MD1 I/O0 15 17 5 7 9 Pull Up About 1Kohm Vcc TxD1 RxD1 MD0 MD1 MD2 H8S/2377RF

/RES

GND 2,4,6,8,10, 12,14,16

Connector*1 3428-6002LCSC *1:Sumitom 3M,Ltd Vcc and PVcc Switches (S5) Vcc(C) Vcc(C) Vcc(C) Vcc(C) Vcc(C) Vcc(C) Vcc and PVcc Switches (S6)

Setting the switches on the HS0008EASF4H on using H8S/2377RF No. 1 2 3 4 5 6 Adapter-Board Signal FWE MD0 MD1 I/O1 I/O2 I/O3 Number On Cable 3 5 7 9 11 13 High(1) High(1) Low(0) Low/High Switches (S3) Control-Signal Enable/Disable Switches (S4) Disable(D) Enable(E) Enable(E) Enable(E) Disable(D) Disable(D)