74VHC273| Datasheet

74VHC273, 74VHC273MTR, 74VHC273TTR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

74VHC273
OCTAL D-TYPE FLIP FLOP WITH CLEAR
s

s s

HIGH SPEED: fMAX = 165 MHz (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 4 uA (MAX.) at TA=25 C HIGH NOISE IMMUNITY: VNIH = VNIL = 28% VCC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) = 2V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 273 IMPROVED LATCH-UP IMMUNITY LOW NOISE: VOLP = 0.9V (MAX.)

SOP

TSSOP

Table 1: Order Codes
PACKAGE SOP TSSOP T&R 74VHC273MTR 74VHC273TTR

DESCRIPTION The 74VHC273 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP WITH CLEAR fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. Information signals applied to D inputs are transferred to the Q outputs on the positive going edge of the clock pulse.

When the CLEAR input is held low, the Q outputs are held low independently of the other inputs. Power down protection is provided on all inputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

Figure 1: Pin Connection And IEC Logic Symbols

November 2004

Rev. 5

1/14