74VHCU04| Datasheet

74VHCU04, 74VHCU04MTR, 74VHCU04TTR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

74VHCU04
HEX INVERTER (SINGLE STAGE)
s s

s s

HIGH SPEED: tPD = 3.5 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC = 2 uA (MAX.) at TA=25 C HIGH NOISE IMMUNITY: VNIH = VNIL = 10% VCC (MIN.) POWER DOWN PROTECTION ON INPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC(OPR) = 2V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 04 IMPROVED LATCH-UP IMMUNITY LOW NOISE: VOLP = 0.8V (MAX.)

SOP

TSSOP

Table 1: Order Codes
PACKAGE SOP TSSOP T&R 74VHCU04MTR 74VHCU04TTR

DESCRIPTION The 74VHCU04 is an advanced high-speed CMOS HEX INVERTER fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. As the internal circuit is composed of a single stage inverter, it can be used in analog applications such as crystal oscillator.

Power down protection is provided on all inputs and outputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V since all inputs are equipped with TTL threshold. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

Figure 1: Pin Connection And IEC Logic Symbols

November 2004

Rev. 5

1/11