E-L6201PSTR| Datasheet

E-L6201PSTR, L6201, L6201013TR, L6201PS, L6201PSTR, L6202, L6203

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

L6201 L6202 - L6203
DMOS FULL BRIDGE DRIVER

SUPPLY VOLTAGE UP TO 48V 5A MAX PEAK CURRENT (2A max. for L6201) TOTAL RMS CURRENT UP TO L6201: 1A; L6202: 1.5A; L6203/L6201PS: 4A RDS (ON) 0.3 (typical value at 25 C) CROSS CONDUCTION PROTECTION TTL COMPATIBLE DRIVE OPERATING FREQUENCY UP TO 100 KHz THERMAL SHUTDOWN INTERNAL LOGIC SUPPLY HIGH EFFICIENCY DESCRIPTION The I.C. is a full bridge driver for motor control applications realized in Multipower-BCD technology which combines isolated DMOS power transistors with CMOS and Bipolar circuits on the same chip. By using mixed technology it has been possible to optimize the logic circuitry and the power stage to achieve the best possible performance. The DMOS output transistors can operate at supply voltages up to 42V and efficiently at high switchBLOCK DIAGRAM

MULTIPOWER BCD TECHNOLOGY

Powerdip 12+3+3

SO20 (12+4+4)

Multiwatt11

PowerSO20

ORDERING NUMBERS: L6201 (SO20) L6201PS (PowerSO20) L6202 (Powerdip18) L6203 (Multiwatt)

ing speeds. All the logic inputs are TTL, CMOS and uC compatible. Each channel (half-bridge) of the device is controlled by a separate logic input, while a common enable controls both channels. The I.C. is mounted in three different packages.

July 2003

1/20

This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice.