EMIF10-1K010F2| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

EMIF10-1K010F2
IPADTM EMI Filter including ESD protection
Main product characteristics
Where EMI filtering in ESD sensitive equipment is required:

Mobile Phones Computers and printers Communication systems MCU Boards

Description
The EMIF10-1K010F2 is a highly integrated device designed to suppress EMI / RFI noise in all systems subjected to electromagnetic interferences. The EMIF10 Flip-Chip packaging means the package size is equal to the die size. Additionally, this filter includes an ESD protection circuitry which prevents damage to the application when subjected to ESD surges up to 15 kV.

Flip-Chip (24 Bumps)

Order code
Part Number EMIF10-1K010F2 Marking FD

Pin configuration (Bump side)
5
I7 I9 I10 09 010

Benefits

4
GND

3
GND

2
I3 I5 I4 03 04

1 A
I1 I2 01 02

EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Lead free package Very low PCB space consuming: 2.42 mm x 2.42 mm Very thin package: 0.650 mm High efficiency in ESD suppression on both input and output pins (IEC 61000-4-2 level 4) High reliability offered by monolithic integration High reducing of parasitic elements through integration & wafer level packaging

GND

B C D E

I8 07 08

I6 05 06

Basic cell configuration

Complies with the following standards:
Low pass filter

IEC 61000-4-2 level 4

Input

Output

15 kV (air discharge) 8 kV (contact discharge)
MIL STD 883F - Method 3015.7 Class 3
TM: IPAD is a trademark of STMicroelctronics
RI/O = 1 k Cline = 100 pF

September 2006

Rev 3

1/7
www.st.com 7