EMIF10-COM01F2| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

EMIF10-COM01F2
IPADTM EMI Filter including ESD protection
Main product characteristics
EMI filtering and ESD protection for:

Computers and printers Communication systems Mobile phones Flip-Chip (25 Bumps)

Description
The EMIF10-COM01F2 is a highly integrated device designed to suppress EMI / RFI noise in all systems subjected to electromagnetic interferences. The EMIF10 Flip-Chip packaging means the package size is equal to the die size. Additionally, this filter includes an ESD protection circuitry which prevents damage to the application when subjected to ESD surges up to 15 kV.

Order code
Part Number EMIF10-COM01F2 Marking FE

Figure 1.

Pin configuration (Bump side)
5
I5

Benefits

4
I4

3
I3

2
I2

1
I1

EMI symmetrical (I/O) low-pass filter Lead free package Very low PCB space consuming: < 6 Very thin package: 0.65 mm High efficiency in ESD suppression on both input & output pins High reliability offered by monolithic integration mm2
GND GND GND GND GND I10 I9 I8 I7 I6

A B C D E

010

Complies with the following standards:
IEC 61000-4-2 level 4 15 kV (air discharge) 8 kV (contact discharge)

Figure 2.

Basic cell configuration
Low-pass Filter

Input

Output

RI/O = 200 Cline = 45 pF

TM: IPAD is a trademark of STMicroelctronics

April 2006

Rev4

1/7
www.st.com 7