EMIF10-LCD01F2| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

EMIF10-LCD01F2
IPADTM 10 line EMI filter and ESD protection
Main product characteristics:
Where EMI filtering in ESD sensitive equipment is required :

LCD for Mobile phones Computers and printers Communication systems MCU Boards Flip-Chip (25 bumps)

Description
The EMIF10-LCD01F2 is a 10 line highly integrated device designed to suppress EMI/RFI noise in all systems subjected to electromagnetic interferences. The EMIF10 Flip-Chip packaging means the package size is equal to the die size. This filter includes ESD protection circuitry, which prevents damage to the application when it is subjected to ESD surges up to 15 kV.

Order code
Part Number EMIF10-LCD01F2 Marking FL

Figure 1.

Pin Configuration (bump side)
5
I5 I10
GND

4
I4 I9
GND

3
I3 I8
GND

2
I2 I7
GND

1
I1 I6
GND

A B C D E

Benefits

EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering Very low PCB space consuming: < 6 mm2 Lead free package Very thin package: 0.69 mm High efficiency in ESD suppression on input pins (IEC 61000-4-2 level 4) High reliability offered by monolithic integration High reducing of parasitic elements through integration and wafer level packaging.
GND GND GND Input
O10 O5 O9 O4 O8 O3 O7 O2 O6 O1

Figure 2.

Basic Cell Configuration

Low-pass Filter

Output
Ri/o = 100 Cline = 35pF

Complies with following standards:
IEC 61000-4-2
level 4 input pins 15 kV 8 kV (air discharge) (contact discharge)

MIL STD 883G - Method 3015-7 Class 3

TM: IPAD is a trademark of STMicroelectronics.

January 2007

Rev 3

1/8
www.st.com 8