F271-AEA-P| Datasheet

F271-AEA-P, F271-AEA-P-TR, F271-AEA-T, F271-AEA-T-TR, F271-AEA5-T-TR, F271-BAG-P, F271-BAG-T, F271-BAG-T-TR, F271-BAG5-T, F271-BAG5-T-TR, ST10F271B, ST10F271E

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

ST10F271B ST10F271E
16-bit MCU with 128 Kbyte Flash memory and 8/12 Kbyte RAM
Features

16-bit CPU with DSP functions 31.25ns instruction cycle time at 64MHz max CPU clock Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator Enhanced boolean bit manipulations Single-cycle context switching support On-chip memories 256 Kbyte Flash memory (32-bit fetch) Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles. Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I2C) 2 Kbyte internal RAM (IRAM) 10/18 Kbyte extension RAM (XRAM) Programmable external bus configuration & characteristics for different address ranges Five programmable chip-select signals Hold-acknowledge bus arbitration support Interrupt 8-channel peripheral event controller for single cycle interrupt driven data transfer 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns Timers Two multi-functional general purpose timer units with 5 timers Two 16-channel capture / compare units 4-channel P
WM unit + 4-channel XPWM

PQFP144 (28 x 28 x 3.4mm) (Plastic Quad Flat Package)

TQFP144 (20 x 20 x 1.4mm) (Thin Quad Flat Package)

A/D converter 24-channel 10-bit 3 us minimum conversion time Serial channels Two synch. / asynch. serial channels Two high-speed synchronous channels One I2C standard interface 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version) Fail-safe protection Programmable watchdog timer Oscillator watchdog On-chip bootstrap loader Clock generation On-chip PLL with 4 to 8 MHz oscillator Direct or prescaled clock input Real time clock and 32 kHz on-chip oscillator Up to 111 general purpose I/O lines Individually programmable as input, output or special function Programmable threshold (hysteresis) Idle, power down and stand-by modes Single voltage supply: 5V 10%

July 2006

Rev 1

1/180
www.st.com
1