L4973| Datasheet

L4973, L4973D3_3, L4973D3_3-013TR, L4973D5_1, L4973D5_1-013TR, L4973V3_3, L4973V5_1, STEVAL-ILL009V1, STEVAL-ILL009V3, STEVAL-ILL009V4

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STEVAL-ILL009V1
RGB color control board based on STP04CM05
Data Brief

Features

Different LEDs as a load can be used 3 A at 4 V DC/DC converter using L4973D3 for user-friendly input (8 - 30 V) Red, green, blue individual tuning 64 levels of brightness for each LED with software color control LED temperature limit set by software SW start up implemented (200 ms) STEVAL-ILL009V1

Description
This board was designed to drive super highbrightness multicolor RGB LEDs with current up to 700 mA per LED. The LED brightness and color are very easily changed by potentiometers, and an automatic color-change mode continuously modulates the color of the LED to generate multicolor light. A LED over-temperature protection is designed on this board, so the power delivered to the LED can be automatically limited to prevent LED overheating. The STEVAL-ILL009V1 is a motherboard assembled without LEDs. To evaluate light effect features, it is necessary to order a load board. Two load boards are available for easy performance evaluation. The first with a OSTAR projection module has ordering code STEVALILL009V3, and the second with Golden Dragon LEDs has ordering code STEVAL-ILL009V4

November 2007

Rev 1

1/4
www.st.com 4

For further information contact your local STMicroelectronics sales office.