L9813| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

L9813
SUPER SMART MIRROR WITH EMBEDDED MCU
DATA BRIEF

FEATURES 8-18V Supply Operating Range 16 MHz Maximum Oscillator Frequency 8 MHz Maximum Internal Clock Frequency Fully Static operation. Low consumption ( 100mA) mode. -40 C to + 150 C Temperature Range ROM: 8Kbytes Data RAM: 256 bytes 64 pin HiQuad package 5 multifunctional bidirectional I/O lines 16-bit Timer, featuring: 2 Input Captures 2 Output Compares External Clock input PWM and Pulse Generator modes UART peripheral including Bus line interface according ISO9141 specifications Serial Peripheral Interface (SPI). 8-bit Analog-to-Digital Converter with 2 dedicated inputs. Programmable Watchdog for system integrity Master Reset and Power-On Reset Two 200m Half-Bridges, Two 400m HalfBridges for sequential driving of 3 DC motors. 50m High-Side driver (Defroster function) 300m High-Side driver (Sidemarker function) 400m High-Side driver (Puddle Lamp function) 300m High-Side driver + Parallel Voltage Regulator (Electro Chrome function 8-bit Data Manipulation 63 basic Instructions and 17 main Addressin
g Modes 8 x 8 Unsigned Multiply Instruction True Bit Manipulation Complete Development Support on DOS/ WINDOWSTM Real-Time Emulator

HiQUAD64

Table 1. Order Codes
Part Number L9813 Package HiQUAD64

Full Software Package on DOS/WINDOWSTM (C-Compiler, Cross-Assembler, Debugger)

2 DESCRIPTION The L9813 Microcontroller Unit (MCU) is a member of the ST7 family of Microcontrollers. The device is based on an industry-standard 8-bit core and features an enhanced instruction set. The device is normally operated at an 16MHz oscillator frequency. Under software control, the L9813 may be placed in either Wait, Slow or Halt modes, thus reducing power consumption. The enhanced instruction set and addressing modes afford real programming potential. In addition to standard 8-bit data management, the L9813 features true bit manipulation, 8x8 unsigned multiplication and indirect addressing modes. The device includes an internal oscillator, CPU, ROM/OTP/EPROM, RAM, 5 I/O lines and the following on-chip peripherals: Analog-to-Digital converter (ADC) with 5 multiplexed analog inputs, industry standard synchronous SPI and asynchronous SCI serial interfaces, digital Watchdog, 16bit Timer, 2 Input Captures and 2 Output Compares.

April 2004
This is preliminary information on a new product now in development. Details are subject to change without notice.

REV. 2 1/5