LM2902H| Datasheet

LM2902H, LM2902HD, LM2902HDT, LM2902HYD, LM2902HYDT

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

LM2902H
Low Power Quad Operational Amplifier
DATA BRIEF

Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes ground Large voltage gain: 100dB Very low supply current/ampli: 375uA Low input bias current: 20nA Low input offset current:s 2nA Wide power supply range: Single supply: +3V to +30V Dual supplies: 1.5V to 15V Internal ESD protection: 250V HBM pin to pin mode, 150V MM D SO-14 (Plastic Micropackage)

Description
This circuit consists of four independent, highgain, internally frequency-compensated amplifiers, which were designed specifically for automotive and industrial control system. It operates from a single power supply over a wide range of voltages. The low-power supply drain is independent of the magnitude of the power supply voltage. Application areas include transducer amplifiers, DC gain blocks and all the conventional op-amp circuits which now can be more easily implemented in single power supply systems. For example, these circuits can be directly supplied off the standard +5V used in logic systems and will easily provide the required interface electronics without requiring any additional power supply. In the linear mode, the input common-mode voltage range includes ground and the output Wafer form voltage can also swing to ground, even though it is operated from only a single power supply voltage.

Pin Connection (top view)
Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 5 Inverting Input 2 6 + + + + 14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 Inverting Input 3 8 Output 3

Output 2 7

Order Codes
Part Number JLM2902H LM2902HD/HDT LM2902HYD/HYDT Temperature Range -40 C, +150 C Package Wafer SO-14 SO-14 (automotive grade level) Packaging Tube or Tape & Reel Tube or Tape & Reel Marking 2902H 2902HY Rev 2 1/2
www.st.com
2

July 2005
For further information contact your local STMicroelectronics sales office.