LM2902W| Datasheet

LM2902W, LM2902WD, LM2902WDT, LM2902WPT, LM2902WYD, LM2902WYDT, LM2902WYPT

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

LM2902W
Low power quad operational amplifier
Features

Wide gain bandwidth: 1.3MHz Input common-mode voltage range includes negative rail Large voltage gain: 100dB Very low supply current per amp: 375uA Low input bias current: 20nA Low input offset current: 2nA ESD internal protection: 800V Wide power supply range: Single supply: +3V to +30V Dual supplies: 1.5V to 15V

N DIP14 (Plastic package)

D SO-14 (Plastic micropackage)

P TSSOP14 (Thin shrink small outline package)

Description
This circuit consists of four independent, highgain, internally frequency-compensated operational amplifiers designed especially for automotive and industrial control systems. It operates from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. All the pins are protected against electrostatic discharges up to 800V.

Pin connections (top view)

Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 Inverting Input 2 5 6 + + + +

14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3

Output 2 7

January 2008

Rev 6

1/17
www.st.com 17