M54HC4051| Datasheet

M54HC4051, M54HC4051D, M54HC4051K, M54HC4051K1

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

M54HC4051
RAD-HARD SINGLE 8-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER
s

s s

s s s

s s

LOW POWER DISSIPATION: ICC = 4uA(MAX.) at TA=25 C LOGIC LEVEL TRANSLATION TO ENABLE 5V LOGIC SIGNAL TO COMMUNICATE WITH 5V ANALOG SIGNAL LOW "ON" RESISTANCE: 70 TYP. (VCC - VEE = 4.5V) 50 TYP. (VCC - VEE = 9V) WIDE ANALOG INPUT VOLT. RANGE: 6V FAST SWITCHING: tpd = 15ns (TYP.) at TA = 25 C LOW CROSSTALK BETWEEN SWITCHES HIGH ON/OFF OUTPUT VOLTAGE RATIO WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V LOW SINE WAVE DISTORTION: 0.02% at VCC - VEE = 9V HIGH NOISE IMMUNITY: VNIH = VNIL = 28% VCC (MIN.) PIN AND FUNCTION COMPATIBLE WITH 54 SERIES 4051 SPACE GRADE-1: ESA SCC QUALIFIED 50 krad QUALIFIED, 100 krad AVAILABLE ON REQUEST NO SEL UNDER HIGH LET HEAVY IONS IRRADIATION DEVICE FULLY COMPLIANT WITH SCC-9408-064

DILC-16

FPC-16

ORDER CODES
PACKAGE DILC FPC FM M54HC4051D M54HC4051K EM M54HC4051D1 M54HC4051K1

DESCRIPTION The M54HC4051 is a single eight-channel analog MULTIPLEXER/DEMULTIPLEXER fabricated PIN CONNECTION

with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series. It contains 8 bidirectional and digitally controlled analog switches. A built-in level shifting is included to allow an input range up to 6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. It has an inhibit (INH) input terminal to disable all the switches when is at high level. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. A, B and C control inputs select one channel out of eight. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

May 2004

Rev. 1

1/12