M54HC75| Datasheet

M54HC75, M54HC75K

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

M54HC75
RAD HARD 4 BIT D TYPE LATCH
s

s s

HIGH SPEED: tPD = 11ns (TYP.) at VCC = 6V LOW POWER DISSIPATION: ICC =2uA(MAX.) at TA=25 C HIGH NOISE IMMUNITY: VNIH = VNIL = 28% VCC (MIN.) SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 4mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL WIDE OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 54 SERIES 75 SPACE GRADE-1: ESA SCC QUALIFIED 50 krad QUALIFIED, 100 krad AVAILABLE ON REQUEST NO SEL UNDER HIGH LET HEAVY IONS IRRADIATION DEVICE FULLY COMPLIANT WITH SCC-9203-065

DILC-16

FPC-16

ORDER CODES
PACKAGE DILC FPC FM M54HC75D M54HC75K EM M54HC75D1 M54HC75K1

DESCRIPTION The M54HC75 is an high speed CMOS 4 BIT D TYPE LATCH fabricated with silicon gate C2MOS technology.

It contains two groups of 2 bit latches controlled by an enable input (G1 2 or G3 4). These two latch groups can be used in different circuits. Each latch has Q and Q outputs (1Q - 4Q and 1Q - 4Q). The data applied to the data input is transferred to the Q and Q outputs when the enable input is taken high and the outputs will follow the data input as long as the enable input is kept high. When the enable input is taken low, the information data applied to the data input is retained at the outputs. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

PIN CONNECTION

June 2004

Rev. 1

1/10