M74HCT4052| Datasheet

M74HCT4052, M74HCT4052RM13TR, M74HCT4052TTR

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

M74HCT4052
DUAL 4-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER
s

s s s

LOW POWER DISSIPATION: ICC = 4uA (MAX.) at TA=25 C LOGIC LEVEL TRANSLATION TO ENABLE TTL LOGIC SIGNAL TO COMMUNICATE WITH 5V ANALOG SIGNAL LOW "ON" RESISTANCE: 70 TYP. (VCC - VEE = 4.5V) 50 TYP. (VCC - VEE = 9V) WIDE ANALOG INPUT VOLTAGE RANGE: 6V FAST SWITCHING: tpd = 13ns (TYP.) at TA = 25 C LOW CROSSTALK BETWEEN SWITCHES HIGH ON/OFF OUTPUT VOLTAGE RATIO WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V LOW SINE WAVE DISTORTION: 0.02% at VCC - VEE = 9V COMPATIBLE WITH TTL OUTPUTS: VIH = 2V(MIN.) VIL = 0.8V (MAX.) PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4052

DIP

SOP

TSSOP

ORDER CODES
PACKAGE DIP SOP TSSOP TUBE T&R

M74HCT4052B1R M74HCT4052M1R M74HCT4052RM13TR M74HCT4052TTR

DESCRIPTION The M74HCT4052 is a dual four-channel analog MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series. It contains 8 bidirectional and digitally controlled analog switches. PIN CONNECTION AND IEC LOGIC SYMBOLS

A built-in level shifting is included to allow an input range up to 6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. It has an inhibit (INH) input terminal to disable all the switches when high, compatible with TTL output level. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. A and B control inputs (TTL Compatible) select one channel out of four in each section. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

March 2003

1/14