SATCR1| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SaTCR-1
Satellite channel router
DATA BRIEF

DESCRIPTION Relaying satellite signals from the rooftop dish to multiple receivers around the home, Digital Video Recorders (DVR) or throughout an apartment block is an expensive proposition for system installers. The SaTCR-1 satellite channel router addresses this problem by combining up to eight input signals onto a single cable. These signals are then decoded by a corresponding number of tuners, potentially distributed across many set-top boxes. The SaTCR-1 device is intended for use in LNBs or switchers in satellite receivers. The device shifts the frequency of any input signal to a fixed intermediate frequency. The output signal is bandpass filtered generating a narrow band output. By combining several SaTCR-1 devices, a corresponding number of sub-bands may be generated and multiplexed together. This composite band can be made of different independent channels issued from different LNB

inputs and polarizations, and can be carried on a single coaxial cable. Figure 1. Package: QFN36 (6 x 6 mm)

xxxx

Figure 2. Single cable installation for multi-satellite receivers

Basic satellite channel routing application Optional legacy output
BPF

BPF

X X

BPF

4x2 or 4x3 matrix

SaTCR

LO LO

Single coaxial cable
Choke Choke

BPF BPF

X X

BPF

SaTCR
PC PC

DVR Rx

ST7LNB1

Rev. 1 October 2004 1/2

SATCR1 Datasheet st Download PDF

Add this permalink to your bookmarks for future download of SATCR1 datasheet

Permalink: http://datasheet.emcelettronica.com/st/SATCR1

SATCR1 DATASHEET