SMP30| Datasheet

SMP30, SMP30-130, SMP30-180, SMP30-200, SMP30-220, SMP30-240, SMP30-270, SMP30-62, SMP30-68

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SMP30
TRISILTM FOR TELECOM EQUIPMENT PROTECTION

FEATURES Bidirectional crowbar protection Voltage range from 62V to 270V Low capacitance from 10pF to 20pF typ.@ 50V Low leakage current: IR = 2uA max. Holding current: IH = 150 mA min. Repetitive peak pulse current: IPP = 30 A (10/1000 us) MAIN APPLICATIONS Telecommunication equipment such as:

Analog and digital line cards (xDSL, T1/E1, ISDN...). Terminals (phone, fax, modem...) and central office equipment.

SMA (JEDEC DO-214AC) Table 1: Order Codes Part Number SMP30-62 SMP30-68 SMP30-100 SMP30-120 SMP30-130 SMP30-180 SMP30-200 SMP30-220 SMP30-240 SMP30-270 Figure 1: Schematic Diagram

DESCRIPTION The SMP30-xxx series has been designed to protect telecommunication equipment against lightning and transient induced by AC power lines. The package / die size ratio has been optimized by using the SMA package. BENEFITS Trisils are not subject to ageing and provide a fail safe mode in short circuit for a better protection. They are used to help equipment to meet various standards such as UL1950, IEC950 / CSA C22.2, UL1459 and FCC part 68. Trisils have UL94 V0 approved resin. SMA package is JEDEC registered (DO-214AC). Trisils are UL497B approved (file: E136224).

Marking QAA QAB QAC QAD QAE QAF QAG QAH QAI QAJ

December 2004

REV. 6

1/9