SPDC400-4W| Datasheet

SPDC400-4W, SPDC400FC12M0_35

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SPDC400-4W
DC-DC step down power supply
Preliminary Data

Features

Module DC-DC step down single output Wide range input voltage 100 370 Vdc Output power 4.0 W Typ Output voltage precision 5% Output short circuit protection No heatsink required Not - latching overload and short circuit protection MTBF > 1.000.000 hours (TA = 25 C) Incapsulated or open frame packages Pins or comb insertion RoHS compliant

Comb

BT = Encapsulated through hole

Through hole

Description
The DC-DC module is a high efficiency DC-DC not insulated switch mode constant voltage generator. Designed for industrial application where low voltages are required from main. Step down converter performs a typ 4.0 W power conversion. The output voltages and current level are set up by design in accordance with customer requirements. Typical reference values for the shelf solution are:

FT = Open frame through hole

Single output -12 V, 5%, 0.35 A.

FC = Open Frame

Table 1.

Device summary
Order codes Package Encapsulated Open frame Open frame Connections Through hole Through hole Comb

SPDC400BT12M0.35 SPDC400FT12M0.35 SPDC400FC12M0.35

October 2007

Rev 1

1/10
www.st.com 10

This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.