SPZB260| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

SPZB260
ZigBee module
Features

Integrated 2.4GHz ,IEEE 802,15,4-compliant transceiver: 0 dBm nominal TX output power -92 dBm RX sensitivity + 2 dBm in boost mode RX filtering for co-existence with IEEE 802.11g and Bluetooth devices Integrated VCO and loop filter Integrated IEEE 802.15.4 PHY and MAC Controlled by a Standard Serial Line for an easy interface of host microcontrollers (SPI) Embedded flash and integrated RAM for program and data storage On board 24 MHz stable Xtal Integrated RC oscillator ( typ 10KHz) for low power operation 1 uA power consumption in Deep sleep mode Watchdog timer and power on reset Pins available for Non-intrusive debug interface (SIF) Single supply voltage 2.1 to 3.6 Vdc. Available Link and Activity outputs for external Indication / monitor CE compliant FCC compliant ( FCC ID:S9NZB260A )

Description
SPZB260 is a low power consumption ZigBee module optimized for embedded applications. It enables OEMs to easily add wireless capability to electronic devices. The module is based on SN260 ZigBee Network Processor which integrates a 2.4GHz, IEEE 802.15.4-compliant transceiver as well as IEEE 802.15.4 PHY and MAC. 24 MHz high stability Xtal is available aboard the module to perform the timing requirements as per ZigBee specifications. A single supply voltage is requested to power the module. An integrated 2.5 GHz specific Murata antenna is aboard. The voltage supply also determines the I/O ports level allowing an easy interface with the host system. The module is controlled by means of a standard serial interface (SPI) allowing the connections to a variety of Host microcontrollers. ( for other information and details, please refer to SN260 Datasheet available at www.st.com )

Applications

Industrial controls Sensor networking Monitoring of remote systems Home applications Security systems Lighting controls

September 2007

Rev 1

1/14
www.st.com 14