ST1S12G12R| Datasheet

ST1S12G12R, ST1S12G18R, ST1S12GR, ST1S12XX, ST1S12XX12, ST1S12XX18

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

ST1S12xx
Synchronous rectification with enable, 0.7 A, 1.7 MHz fixed or adjustable step-down switching regulator in TSOT23-5L
Features

Step-down current mode PWM (1.7 MHz) DCDC converter 3% DC output voltage tolerance Synchronous rectification Fixed output voltage 1.2 V, 1.8 V, and ADJ (available on request 1.5 V, 2.5 V and 3.3 V) Enable function Internal soft start Typical efficiency: > 90% 0.7 A output current capability Not switching quiescent current: max 600 uA over temperature range RDSON typ. 250 m and 400 m Uses tiny capacitors and inductors Operative junction temp. -40 C to 125 C Available in TSOT23-5L package required. Moreover, a low output ripple is guaranteed by the current mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermally protected and the current is limited to prevent damage due to accidental short-circuit. The ST1S12Gxx is available in the TSOT23-5L package.
TSOT23-5L

Description
The ST1S12Gxx is a step down DC-DC converter optimized for powering low-voltage digital cores in HDD applications and, generally, to replace the high current linear solution when the power dissipation may cause high heating of the application environment. It provides up to 0.7 A over an input voltage range of 2.5 V to 5.5 V. A high switching frequency (1.7 MHz) allows the use of tiny surface-mount components. In addition to the resistor divider to set the output voltage value, only an inductor and two capacitors are Table 1. Device summary
Part numbers ST1S12XX ST1S12XX12 ST1S12XX18
1. Available on request.

Order codes ST1S12GR ST1S12G12R ST1S12G18R (1)

Package TSOT23-5L TSOT23-5L TSOT23-5L

February 2008

Rev 2

1/20
www.st.com 20