ST7FLIT2-COS_COM| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

ST7FLIT2-COS/COM
Cosmic's Low-Cost Starter Kit for ST7FLITE2 and ST7FLITE1
DATA BRIEF

The Cosmic Starter Kit for ST7FLITE2 (ST ordering code: ST7FLIT2-COS/COM) is a lowcost kit that provides everything you need to evaluate ST7FLITE2 and ST7FLITE1 features, including Flash memory with read-out protection, on-board EEPROM data memory, 10-bit ADC, 1% internal RC oscillator, SPI and auto-reload timer. The ST7FLITE2 Starter Kit takes advantage of the Debug Module of the ST7FLITE2 microcontroller (MCU) to provide in-circuit debugging (ICD) via the kit's RS232 connector.

Figure 1.

ST7FLITE2 Starter Kit

Product Architecture
ST7FLITE2 Evaluation Board: Provides features for evaluation of the included ST7FLITE2 device (analog and digital I/Os, LEDs, switches, and potentiometer). It includes an RS232 connector, which direct ICD connection between the board and the host PC running the ZAP debugging software. The included ST7FLITE2 device allows you to develop applications for all ST7FLITE2x and ST7FLITE1x microcontrollers. Cosmic Tool Suite: The IDEA integrated development environment running on the host PC is preconfigured for use with the Cosmic C Compiler for ST7 (CXST7). It integrates a complete range of Cosmic tools for editing, compiling and debugging your application from a single, easy-to-use environment. Cosmic C Compiler (CXST7): The "2K CodeSize Limited" version of the Cosmic C Compiler and Smart Linker for ST7 includes syntax extensions for efficient use of all microcontroller specific features (Zero page, peripherals, EEPROM, paged memory...). ZAP Debugger: Cosmic's full-featured debugging software allows source-level
debugging of your embedded application while it runs on the board's ST7FLITE2 thanks to the ICD connection and the MCU's on-chip debugging resources.

Key Features
ST7FLITE2 Evaluation Board:

ICD via RS232 connector (RS232 cable is included) 2 real-time hardware breakpoints, which can be combined to provide advanced breakpoints ST7FLITE2 microcontroller LEDs and switches on analog and digital I/O ports Potentiometer 9V battery

Cosmic Tool suite:

IDEA, Integrated Development Environment for ST7 Integrated editor with syntax highlighting for C and Assembly source files Project Manager for easy access to frequently used functions Link file generator for point-and-click configuration of memory map Graphical smart build for easy control of application (re)build and user-defined utilities (No need for a makefile)
Rev 1 1/3
www.st.com
3

August 2005

CD00063505

For further information contact your local STMicroelectronics sales office.