ST7MDT20-T44_DVP| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

ST7MDT20-T44/DVP
TQFP44 (10x10) Connection Kit for ST7MDT20-DVP3
DATA BRIEF

The TQFP44 (10x10) Connection Kit (ST7 MDT20-T44/DVP) provides the hardware you need to connect your ST7MDT20-DVP3 emulator to your application when debugging applications for ST7 microcontrollers in the TQFP44 (10x10) package.

Figure 2.

TQFP44 device adapter (DB544)

Connection Kit Contents

One additional 50-pin flat cable required for connection between emulator and the adapter. TQFP80/64/44 adapter (DB530) Allows the connection of your ST7MDT20-DVP3 emulator to your application board in place of your ST7. TQFP44 (10x10) device adapter (DB544) Adapts the emulator connection to the package of your ST7. Yamaichi TQFP44 socket (IC149-044-052S5) solders to your application board to allow connection of the emulator or installation of your ST7. Figure 3. Connection to application board

Orientation Indicators

3. Plug flat cables into the corresponding connectors J1 and J2 on the adapter

For more information...

ST7-DVP3 User Manual Information common to all DVP3 series emulators ST7MDT20-DVP3 Probe User Guide Information specific to ST7MDT20-DVP3 Flat cable and adapter
TQFP 80/64/44 Adapter (DB530)

4. Plug the W1 and W2 connectors on the adapter into the corresponding connectors on the device adapter.
Pin 1 Indicators

Figure 1.

2. Align pin 1 indicators, then secure the device adapter to the socket. 1. Solder socket to application board.

Additional 50-pin flat cable

October 2005

Rev 1 1/3
www.st.com
3

ST7MDT20-T44_DVP Datasheet st Download PDF

Add this permalink to your bookmarks for future download of ST7MDT20-T44_DVP datasheet

Permalink: http://datasheet.emcelettronica.com/st/ST7MDT20-T44_DVP

ST7MDT20-T44_DVP DATASHEET