STEVAL-IPE004V1| Datasheet

Datasheet preview, take a look at Datasheets before downloading (Data Sheet is available on manufacturer site)

STEVAL-IPE004V1
Electricity Meter (mono phase) - Measurement Board 1 Shunt
Data Brief

Features

Single-phase, 0.5 class accuracy guaranteed UNOM(RMS) = 140 to 300V, INOM/IMAX(RMS) = 2/20A, fLIN = 45 to 65Hz, TAMB = -40 to +85 C LED checking for: Functioning No Load Condition Reverse Energy Direction Stepper Motor Display Connector Capacitive Power Supply SPI Interface Connector: Active, Reactive Apparent Power consumption VRMS, IRMS and Line Frequency Status STEVAL-IPE004V1

Applications
This metering module can be used to build a Class 0.5 Single-phase standalone or microprocessor based meter with or without Tamper detection for power line systems of UNOM = 140 to 300VRMS, INOM/IMAX = 2/20ARMS, fLIN = 45 to 65Hz and TAMB = -40 to +85 C. In standalone mode, a stepper motor display should be connected to pins W5 and W6. A user can select the type of stepper or the constant of output pulse frequency by changing LVS or KMOT configurators respectively. In Microprocessor based mode, a control board with a microprocessor should be connected to the male connector P1 of the module using a 10-wire flat cable.

January 2006
For further information contact your local STMicroelectronics sales office

Rev 1 1/4
www.st.com 4